The unevenness of the aluminum plate is caused by 40% of the material and 60% of the construction. In fact, every aspect is indispensable.
main reason:
1. Deepening the design Folding size: The conventional folding size of the aluminum sheet factory is 20mm, but in the project design, due to the façade effects such as deep grooves, the designer usually directly widens the folding size, or even folds ...
The commonly used aluminum plate model 1080 is aluminum alloy, and it is impossible to have pure aluminum. However, due to the different alloy content, the mechanical properties of aluminum alloys are also different. At present, the 1080 type aluminum alloy commonly used in my country can be divided into five grades: The first grade: aluminum-magnesium alloy, with some manganese. The biggest advantage of this ...
Divided by use: 1. Aluminum-plastic panels for building curtain walls: the minimum thickness of the upper and lower aluminum panels is not less than 0.50mm, and the total thickness is not less than 4mm. The aluminum material should meet the requirements of GB/T according to 3880. Generally, 3000 and 5000 series aluminum alloy plates are coated with fluorocarbon resin. 2. Aluminum-plastic panels are used for ...
Aluminum sheets for traffic signs are usually made of aluminum alloy sheets with other elements added. Usually, an aluminum plate coated with a layer of colored paint is used as a sign, most of which are blue, green, and yellow aluminum plates. Because of its good reflection effect and corrosion resistance, the color-coated aluminum sheet is widely used in the field of traffic signs to remind pedestrians and vehi ...
1. The most important process before using the perforated aluminum plate is the accurate measurement of the construction site data. The general tape measure will have a large measurement error, which will cause the tight seam splicing to fail to meet the standard requirements during installation. Be sure to use an infrared rangefinder for accurate measurements.
2. When perforating the perforated aluminum plate, ...
1. Cut corners With the continuous improvement of the national quality control system, the phenomenon of cutting corners is not as rampant as before. However, in order to reduce production costs, there are still some companies who take risks by cutting corners and using molds of substandard quality in the process of producing aluminum veneer products. , Resulting in unqualified wall thickness of the aluminum p ...