The aluminum plate of five millimeters can be bent too much if it is only required to bend and the quality of the aluminum plate is not related. First of all, is the most important state, the state is divided into rigid and half-hard, soft state (a usually peaceful state called O state) not all complex bending effect basic row (state of aluminum plate is H18, H19 and H38 is all hard) half-hard state of the a ...
Today we will learn about aluminum veneer.
In fact, this aluminum veneer refers to a single aluminum plate that is processed by cutting-engraving-stamping-welding-grinding and other processes. The fluorocarbon spraying technology is used to form a building decoration material. This material is widely used in various buildings. Internal and external walls, airports, stations, hotels, offices, hospitals and other ...
The scientific name of aluminum-plastic panel is also called aluminum-plastic composite panel. It is a three-layer composite panel with plastic as the star layer and aluminum on both sides, and a decorative and protective coating and film on the surface of the panel. Material.
The common size on the market is 2 meters 44 times 1 meter 22, of course, other sizes can also be customized according to customer requir ...
Aluminum (Al), %
97.5 to 99
97.5 to 99.4 Chromium (Cr), %
0 to 0.1
0 to 0.1 Copper (Cu), %
0 to 0.1
0 to 0.1 Iron (Fe), %
0 to 0.35
0 to 0.35 Magnesium (Mg), %
0.4 to 0.6
0.45 to 0.9 Manganese (Mn), %
0 to 0.1
0 to 0.1 Silicon (Si), %
0.6 to 0.9
0.2 to 0.6 Titanium (Ti), %
0 to 0.1
0 to 0.1 Zinc (Zn), %
0 to 0.1
0 to 0.1 Residuals, %
0 to 0.15 ...
Before the aluminum alloy sheet is formed and completed, the surface of the plate needs to be pretreated to facilitate the processing of it later. Pretreatment includes 5 steps. Degreasing treatment: The purpose is to remove the lubricant and other dirt on the surface of the product, in order to ensure that in the alkali washing process, the surface corrosion of the product is uniform, in order to improv ...
What is the difference between 6061 T5 and 6061 T651 aluminum sheet? The 6000 series represents 6061 aluminum, which contains mainly magnesium and silicon. It is a cold-treated aluminum forging product with the advantages of 4000 Series and 5000 Series.
The difference between the state T6 and T651 of 6061 aluminum sheet is that the internal stress of T6 is relatively large and the processing will be deformed ...
