Analyse häufiger Probleme von 5052 Aluminiumteller

Die nützlichste Anwendung von 5052 Aluminiumblech ist Erscheinungsteile oder elektronisches Zubehör. Die gemeinsamen Probleme von 5052 Aluminiumblech sind wie folgt:

1. There are defects on the surface of the aluminum plate

The surface problems of 5052 Aluminiumteller, außer für den Fall im Zusammenhang mit dem Rohling, die meisten Gründe sind auf die verschiedenen Maschinen im Produktionsprozess zurückzuführen.

2. Nach der Oxidation, es gibt Mängel wie Farbunterschiede, schwarze Seide, Sandloch, etc.

Es gibt viele Gründe für schwarzes Kabel, such as the rolling mill oil dripped on the auxiliary machine due to poor management, and the indentation caused by excessive pressure or excessive tension on the plate surface. If thin material is rolled again, these dark marks will become It becomes thinner and thinner, forming dark lines or black lines, and sometimes it is not clear whether it is oil or traces, and there is no color difference on the surface at all, but the performance is very obvious after oxidation. For customers , Seeing the appearance of inconsistency, it must be rejected. The appearance of black silk after oxidation is the most life-threatening thing. Once this happens, there is almost no room for survival, and the losses and consequences brought about are irreparable. Zweitens, chromatic aberration. Allgemein, the chromatic aberration cannot appear in products that are made of exterior parts. Any customer is unwilling to accept products like thetwo skin face”. To eliminate these problems, it is still necessary to rely on the source machine to control.

Causes of sand holes: Sand holes are generally internal structural problems, which are caused by factors such as impurities or water vapor that are not cleaned out during the ingot casting, or other elements are not evenly stirred. Deswegen, it is required to control and detect the source link of the ingot Great.

3. Performance requirements: Zerreißfestigkeit, Härte, Verlängerung, bending requirements, etc.

As for performance problems, bending deformation is the most common. This link cannot be generalized due to the different uses of customersproducts. jedoch, in general, there are standards for annealing process, how much temperature, how long, and how thick it is to retreat.

5052 aluminum sheet is widely used and has many product categories, but as long as you pay attention to the management and control of each link, control the common problems at the source, and the process is stable, the products made will definitely be favored by the market!