Aluminum is one of the metals most widely used in industry and daily life, when it comes to the aluminum alloy, the 1000 series aluminum sheet come to our mind, there are two typical aluminum sheet in 1000 series aluminum sheet alloy, they are 1050 aluminum sheet and 1060 aluminum sheet, they are all with high content of aluminum, they looks like the same, but their types are different, what is the difference bet ...
5083 marine Aluminum Alloy sheet in good corrosion resistance, the corrosion rate in seawater is very slow, the uniform corrosion rate is generally 0.025-0.05mm/ years, can resist the corrosion of seawater and marine atmosphere on the ship, reduce oil and maintenance cost, long service life. 5083 marine Aluminum Alloy plate with high strength and low fracture toughness, it is suitable for hull structure material, ...
7005 aluminum alloy is used bicycle frames, due to its relative ease of welding it does not require expensive heat treating - it is however harder to form making manufacture more challenging. It has an Ultimate Tensile Strength of 350MPa, a Fatigue Strength of 150MPa and a density of 2.78g/cm³ compared to a Ultimate Tensile Strength of 310MPa and Fatigue Strength of 96.5 MPa and a density of 2.70g/cm³ for 6061 al ...
3004 aluminum sheet is a non- heat treatable aluminum alloy with manganese as its primary alloying element. It is similar to 3003 except for the addition of approximately 1% magnesium. It can be used to produce tempers with a higher strength but a lower ductility.
the 5052 aluminum alloy is used to make beverage closure without internal pressure. The raw material is 5052 H19 aluminum sheet, the material is fir ...
In the kneading process of aluminium plate, there will be skin or bubbles on the surface. What is the cause of formation? What can be done to eliminate it?
What is bubble or peeling: convex bubbles appear on the appearance of products, often seen in the head, and tail, completely called bubbles, which have been broken called peeling.
Aluminum plate kneading bubble, peeling reason.
Kneading cylinder and ...
6063 Aluminum is AL-Mg-Si system with moderate strength alloy. It can be heat strengthened, industrial aluminum profile summary Mg and Si is the main alloying elements, and the main work is to determine the chemical composition of the preferred percentage of Mg and Si. 6063 is the main element in the preparation of Mg-Si alloy, the content of each element has a certain range, and the price of magnesium is high. S ...