1050 aluminium alloy is an aluminium-based alloy in the “commercially pure” wrought family (1000 or 1xxx series). As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. 1050 alloy is also sometimes used for the manufacture of heat sinks, since it has a higher thermal conductivity than other alloys. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.
Aluminum sheet 6061 T4 is used in many types of industrial applications, including: Aircraft panels Automotive panels Trailer frames Packaging And more
5083 aluminum sheet is a high strength material, exhibiting higher strength than 5052 sheet.5083 H116 is an alloy used for high strength welded applications, with excellent marine environment corrosion resistance. It has a superior “skin finish” developed to prevent skin lamination, thus providing even better resistance to inter-granular corrosion than alloy 5083 H321. It has higher Tensile and Yield strengths than Alloy 5086 but less than 5456. Aluminium 5083 is a strong magnesium-manganese-chromium-aluminium alloy. It can be hardened by cold work, but is not heat treatable to higher strength. It has good ductility for the strength level, better than most other 5000 series alloys. Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. It has the low density and excellent thermal conductivity common to all aluminium alloys. Alloy 5083 is best known as a plate for ship building.The alloy is also produced as extruded seamless tube and other extrusions and as forgings.