그만큼 1050 알루미늄 합금은 순수한 알루미늄에 소량의 구리 원소를 첨가하여 형성됩니다., 그리고 1050 알루미늄 시트는 강도가 낮습니다., 우수한 성형성, 표면 처리 특성, 용접성과 내식성. 게다가, 산업용 순수 알루미늄은 높은 소성 특성을 가지고 있습니다., 내식성, 전기 전도성 및 열 전도성, 하지만 힘이 약해요, it can not be strengthened by heat treatment, the machinability is not good, and contact welding and gas welding are acceptable. The higher the purity, the lower the hardness of the aluminum plate, 에서 1000 series pure aluminum alloys, 1050 aluminum has higher strength, it is almost the same as 1060 알류미늄.

“Let’s know about on the common uses of marine aluminium alloy sheet plate in the manufacturing and production of various appliances. aluminium alloy sheet plate for pots, 팬, and cans. As aluminum plain sheet is a valuable metal that can be recycled and has taste-preserving quality, it is used in soda cans. Kitchen utensils are also made with aluminum due to its thermal conducting property and nontoxic properties.”

“Heat treatment cannot be used to make it hardenable. Compared to 5005 합금,5052 aluminum has better resistance in marine environments. It also has excellent corrosion resistance when used in slightly alkaline conditions. A protective surface film is over the 5052 알류미늄, which gives the metal its corrosion resistance. When damage happens, the rapid reaction between aluminum and oxygen repairs it. When the film can’t be repaired, corrosion can quickly occur to the base metal. To help prevent this from happening, the metal can be anodized, which will make the protective surface film thicker. Heat treatment can be used on this metal, which should be performed at 653 degrees F; the cooling rate and time at this temperature isn’t important. It’s rare for stress relief to be needed, but can be done at 428 degrees F. Stress relief should be used when the loss of strength is a concern. This metal is also readily machinable and weldable. 5052 aluminum sheets can be purchased in sizes between .032 그리고 .1875 인치 두께, 48 그리고 60 inches wide and up to 144 inches thick.”