5052 알루미늄 시트, 주로 성형 성능이 좋은 마그네슘 합금 요소에 사용됩니다., 내식성, 용접성 및 중간 강도, 비행기 기름탱크 제작에 사용된, 송유관, 운송수단도 그렇고, 배들, 판금 부품, 기구, 램프 스텐트 및 리벳, 금속 제품, 전기 인클로저, etc.5052 알루미늄 시트, with thickness more than 6mm and magnesium content between 2.2% – 2.8% 무게로, is a typical product of 5XXX series aluminum alloys, and belongs to low-magnesium and non-heat-treatable alloy.The features of 5052 aluminum alloy plates:

1.Moderate strength;

2. 우수한 내식성;

3. Good weldability;

4. Better formability;

5. Good fatigue strength;

6. Anodizing material 6061 알루미늄 시트, the main alloy elements are magnesium and silicon. If a certain amount of manganese and chromium, can neutralize the bad effect of iron; sometimes add a small amount of copper or zinc to improve the strength of the alloy, and the corrosion resistance decreased significantly; there is a small amount of copper conductive materials, titanium and iron to offset the adverse effects on the conductivity of the zirconium; or titanium recrystallization grain refinement and control; in order to improve the cutting performance, adding lead and bismuth.

In Mg2Si solution, the alloy has artificial aging hardening function.alloy Si Fe Cu Mn Mg Cr ZnTi Al 60610.4-0.80.70.15-0.40.150.8-1.20.04-0.350.250.15rem.The main alloy elements in 6061 aluminum alloy are magnesium and silicon, 적당한 강도를 가지고 있는 것, good corrosion resistance and weldability, and the oxidation effect is better.6061 aluminum plate has excellent processing performance, 좋은 내식성, high toughness and non deformation after processing, easy to paint film, excellent oxidation effect and other excellent features.