그만큼 1050 알루미늄 합금은 순수한 알루미늄에 소량의 구리 원소를 첨가하여 형성됩니다., 그리고 1050 알루미늄 시트는 강도가 낮습니다., 우수한 성형성, 표면 처리 특성, 용접성과 내식성. 게다가, 산업용 순수 알루미늄은 높은 소성 특성을 가지고 있습니다., 내식성, 전기 전도성 및 열 전도성, 하지만 힘이 약해요, it can not be strengthened by heat treatment, the machinability is not good, and contact welding and gas welding are acceptable. The higher the purity, the lower the hardness of the aluminum plate, 에서 1000 series pure aluminum alloys, 1050 aluminum has higher strength, it is almost the same as 1060 알류미늄.

Aluminum is a strong steel that can withstand weight very easily. This property makes it compatible to manufacture wheels for heavy vehicles. 그래서, as to withstand heavy pressure to carry heavy loads by trucks and other vehicles aluminum wheels are most important. Rail systems in Japan and aircraft are also made using aluminum.

3003 Aluminum Alloy contains Manganese as its major alloying element. 3003 Aluminum is an alloy with very good corrosion resistance and moderate strength. It is not heat treatable and develops strengthening from cold working only. 3003 Aluminum Alloy has good machinability and welding is readily accomplished by means of conventional welding methods. 화학 장비에 일반적으로 사용됩니다., 덕트 공사, 그리고 일반적인 판금 작업에서는. 3003 Aluminum is typically used in stampings and the manufacturing of pressure vessels, 건축업자의 하드웨어, 차고 문, 천막 칸막이, 냉장고 패널, 가스 라인, 가솔린 탱크, 열교환기, 인발 및 회전 부품, and storage tanks. All of our 3003 Aluminum Sheet is protected on one side with a protective vinyl film.