무엇인가요 6063 알루미늄 시트?
6063 알루미늄 시트는 Al-Mg-Si 합금입니다., 우수한 처리 성능으로, 우수한 납땜성, 압출 및 도금, 좋은 내식성, 인성, 쉬운 연마, 아노다이징 탁월한 효과, 전형적인 압출 합금입니다.
6063 알루미늄 시트는 건축 프로파일에 널리 사용됩니다., 관개 파이프, 차량, 벤치, 가구, 가소성이 좋은 리프트.
밀 마무리 6063 aluminum alloy is widely used in the construction of aluminum doors, windows and curtain walls. It is an ordinary aluminum alloy model. In order to ensure that doors, windows and curtain walls have high wind pressure resistance, 조립 성능, corrosion resistance and decoration performance, the comprehensive performance requirements of aluminum alloy profiles are far higher than the industrial profile standards.
화학 성분의 6063 aluminum alloy has become an important part of the production of high-quality aluminum alloy building profiles.
6063 알루
매개변수 6063 합금 알루미늄 시트
| 동등한 이름 |
a6063, 6063ㅏ, al6063, aa6063, 6063아아, 6063 아아, 아아 6063 grade etc |
| 성질 |
- Soft HO, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H111, H112, H114, H116, H131, H321 등
|
- T0, T2, T3, T4, T5, T6, T7, T8, T24, T32, T35, T73, T74, T83, T351, T354, T650, T651, T851 etc
|
6063 Aluminum sheet properties by temper
|
| 합금 |
성질 |
두께(mm) |
너비(mm) |
길이(mm) |
Typical products |
| 6063 알루미늄 시트 |
영형， T4， T6， T651 |
0.3-600 |
500-2600 |
500-16000 |
Commercial vehicle floor, roof structure |
화학 성분 6063 알루미늄 판
|
| 그리고 |
구리 |
마그네슘 |
아연 |
망 |
Cr |
철 |
의 |
기타 합계 |
알 |
| 0.2 – 0.6 |
≤ 0.1 |
0.45 – 0.9 |
≤ 0.1 |
≤ 0.1 |
≤ 0.1 |
≤ 0.35 |
≤ 0.1 |
≤ 0.2 |
나머지 |
6063 Aluminum sheet Typical Mechanical Properties
|
| 인장강도 σb (MPa) |
≥205 |
| Elongation stress σp0.2 (MPa) |
≥170 |
| Elongation δ5 (%) |
≥7 |
| Sample size |
diameter≤12.5 |
| 메모 |
Longitudinal mechanical properties of bar at room temperature |
Typical Mechanical Properties
|
| 성질 |
인장 |
경도 |
|
궁극적인 |
생산하다 |
연장 |
브리넬 |
|
세종학당 |
MPA |
세종학당 |
MPA |
% |
|
| T5, T52 |
27 |
186 |
21 |
145 |
12 |
60 |
| T6 |
35 |
241 |
31 |
214 |
12 |
73 |
6063 alloy aluminum sheet performance
6063 aluminum alloy is a medium-strength heat-resistant alloy of the AL-Mg-Si series. Magnesium and silicon are the main alloying elements. The main task of optimizing chemical composition is to determine the percentage of Mg and Si (질량 분율, the same below).
- The role and influence of Mg and Mg constitute the strengthening phase of Mg2Si. The higher the magnesium content, the greater the Mg2Si content, the greater the heat treatment strengthening effect, the higher the tensile strength of the profile, but the deformation resistance also increases, the alloy plasticity decreases, the processing performance deteriorates, and the corrosion resistance decreases.
- The role of Si and the amount of Si should be such that all Mg in the alloy can exist in the form of the Mg2Si phase to ensure that the role of Mg is fully exerted. With the increase of Si content, alloy grains are refined, metal fluidity increases, casting performance improves, heat treatment strengthening effect increases, profile tensile strength increases, plasticity decreases, and corrosion resistance decreases.
6063 alloy aluminum sheet surface corrosion
As long as the purchase of raw materials and alloy composition is effectively controlled to ensure that the ratio of magnesium to silicon is within the range of 1.3 에게 1.7, the silicon corrosion behavior of 6063 aluminum alloy profiles can be prevented and controlled, and various process parameters are strictly controlled to avoid segregation and desalinization. Silicon magnesium forms a favorable Mg2Si strengthening phase.
If this phenomenon of silicon corrosion spots is found, special attention should be paid to the surface treatment. Try to use a weak alkaline bath in the degreasing and degreasing process. If conditions do not permit, it should be soaked in acid degreasing fluid for a period of time. As short as possible (qualified aluminum alloy profiles can be placed in acidic degreasing solution for 20-30 minutes without problems, problematic profiles can only be placed for 1-3 minutes), the pH value of the cleaning water should be high (pH>4, control Cl Content), the alkali corrosion process should be as long as possible, the nitric acid light solution should be used when neutralizing light, and sulfuric acid anodizing should be energized and oxidized as soon as possible so that the dark gray corrosion points caused by silicon are not obvious and meet the requirements of use.
6063 Alloy Metal Aluminum Sheet Plate
6063 alloy aluminum sheet applications and features
6063 Aluminum Sheet surface is very smooth and easy to anodize and color;
시간eat treatment to strengthen, high impact toughness, not sensitive to the gap.
- Strengthened by heat treatment, high impact toughness, not sensitive to notches.
- It has good thermoplasticity and can be extruded at high speed into complex, thin-walled, hollow profiles, or forged into complex forgings.
- The quenching temperature range is wide and the quenching sensitivity is low. After extrusion and forging demolding, as long as the temperature is higher than the quenching temperature, it can be quenched by spraying water or passing through water. Thin-walled parts (δ <3mm) can also be air-quenched.
- Excellent welding performance and corrosion resistance, no stress corrosion cracking tendency. Among heat-treatment-strength able aluminum alloys, Al-Mg-Si series alloys such as 6061 aluminum sheet are the only alloys that have not found stress corrosion cracking. 5. After processing, the surface is very smooth and easy to anodize and color. Its disadvantage is that if it is left at room temperature for a period of time after quenching, it will adversely affect the strength in terms of aging (the parking effect).
- Customized cnc machining aluminum parts, 6063 aluminum alloy extrusion for electronic with end plates
- Heat sink
내 근처의 알루미늄 시트 제조업체
허난 화웨이 알루미늄 주식회사, 주식회사. 중국의 많은 알루미늄 제조업체 및 공급업체의 리더입니다.. 우리는 품질을 엄격하게 관리하고 고객에게 중점을 둡니다.. 우리는 귀하와 심층적인 협력을 갖고 고품질의 알루미늄 소재 제품 맞춤형 OEM 서비스를 제공하기를 희망합니다.. kg당 최신 최저가를 알고 싶다면 ( 킬로그램 ) 또는 표준 중량 톤당, 문의하시기 바랍니다.
알루미늄 시트 플레이트 표준 수출 포장
- 알루미늄 판은 클립 또는 라미네이트 처리되어 알루미늄 판의 표면이 손상되지 않고 흠집이 없는지 확인합니다.;
- 플라스틱 필름 ( HDPE, PVC, PE 또는 PET 등 ) 습기와 비를 방지하기 위해 보호 또는 하드 크라프트지 포장을 사용하여 운송 중에 알루미늄 판이 깨끗하고 먼지가 없는지 확인합니다. (각 패키지에는 중국 동부 및 남부 지역에서 제품의 품질을 보장하기 위한 방습 건조제가 포함되어 있습니다., 비가 더 많이 오는 곳);
- 운송 중 충돌을 방지하고 알루미늄 판의 기하학적 구조가 변경되지 않도록 보장하기 위해 나무 브래킷으로 설치하고 강철 스트랩으로 강화했습니다.;
- 수출제품의 경우, 우리는 포장을 위해 훈증 표시가 있는 나무 상자와 팔레트를 사용합니다.;
- 우리는 또한 고객의 다른 포장 요구 사항에 따라 포장할 수 있습니다.;
