ขั้นตอนพื้นฐานของการทำแผ่นอลูมิเนียม

1. แผ่นและแถบอลูมิเนียมและอลูมิเนียมอัลลอยด์มีจำหน่ายในสถานะรีดร้อน, สถานะอบอ่อน, สถานะอ่อนหลายระดับและสถานะการรักษาความร้อนต่างๆ.

2. การเตรียมการก่อนการรีดร้อน ส่วนใหญ่จะรวมถึงการตรวจสอบคุณภาพก้อนโลหะ, แช่, เลื่อย, การโม่, การเคลือบอลูมิเนียมและการทำความร้อน.

3. อัตราการเย็นตัวสูงมากระหว่างการหล่อแบบกึ่งต่อเนื่อง, the diffusion process in the solid phase is difficult, and the chemical composition and structure unevenness are easy to form inside the ingot, such as intragranular segregation, which reduces the plasticity.

4. When the surface of the ingot has defects such as segregation floating, slag inclusion, scarring and cracks, milling should be carried out (see non-ferrous metal alloy ingot milling surface), which is an important factor to ensure good surface quality of the finished product

5. Hot rolling: Hot rolling of aluminum alloy ingots is to provide blanks for cold rolling, or directly produce thick plates in hot rolled state.

6. The hot rolling process system includes pass reduction rate, rolling temperature, rolling speed and lubrication cooling, ฯลฯ.