6061-Относится к алюминиевому листу 0,7 мм, but it is hot short…. Относится к алюминиевому листу 0,7 мм. It’ll crack on the outside of the bend every time. Относится к алюминиевому листу 0,7 мм. Относится к алюминиевому листу 0,7 мм. Относится к алюминиевому листу 0,7 мм. Henan Huawei Aluminum also has professional industrial shears for precise cutting of sheet metal of any material, with four machines that have a maximum length of 4 м. В алюминиевые листы must have a maximum thickness of 20 mm.Wide rage of aluminum metal sheet processingHenan Huawei Aluminum can perform a wide range of aluminum sheet metal processing and profiles including:• Aluminum• Iron• Carbon• Stainless steel• Various alloysConsidering the poor formability of aluminum alloys at room temperature, this study proposes a stamping technique assisted by arc pretreatment that locally modifies the material properties. V-shape bending tests are conducted on the arc-treated specimens. The formability (bendability in particular) из 6061-T6 aluminum alloy is significantly improved by arc pretreatment and the springback is reduced as well. The reasons for formability improvement and springback reduction are analyzed through the microstructure, mechanical property, and fracture morphology of the heat-affected zone. The hardness at different locations within the heat-affected zone before and after bending is also tested. Наконец-то, the advantages of arc pretreatment over other traditional forming processes at elevated temperatures are explained.We supply aluminum sheet plate in different alloy and temper as following:

пластина из алюминиевого листа

Сплав

Толщина(мм)

Ширина(мм)

Длина(мм)

Характер

DCorCC

1050 1060 1070 1100

0.2-3.0

20-1850

1000-10000

О,H12,H22,H14,H24,H16,H26, H18,H32

ОКРУГ КОЛУМБИЯ,CC

1235

3.0-150

500-2200

H112,H111

ОКРУГ КОЛУМБИЯ

3003 3004 3105

0.2-3.0

300-1850

1000-10000

О,H12,H22,H14,H24,H16,H26, H18,H32

ОКРУГ КОЛУМБИЯ,CC

3.0-150

900-1900

H112,H111

ОКРУГ КОЛУМБИЯ

5052508357545005

0.2-3.0

300-1850

1000-10000

О,H12,H22,H14,H24,H16,H26, H18,H32,H36,H116,H112,H321

ОКРУГ КОЛУМБИЯ

3.0-400

900-2600

H112,H111

ОКРУГ КОЛУМБИЯ

60616063

1.0-400

300-1500

1000-10000

T6,T651

ОКРУГ КОЛУМБИЯ,

Упаковка

Exportstandardwoodenpalletspacking

заявка

MainlyinConstruction,украшение,PCBmaterials,covermaterial,LCDbackpanel,

refrigeration,airconditioner,автомобиль,так далее

Минимальный заказ

5MT

Kindattention

Specificationscanbecustomizedasthecustomer’srequirements