1050 pure aluminum sheet plate

1050 metal aluminum sheet plate belongs to a commercially pure wrought family with a purity of 99.5% Aluminium( over 99.0% ). Except for Al, 0.4% of Fe is added to 1050 aluminum plates, thus, they have high electrical conductivity. 1000 series aluminum group offers the best correction resistance compared to any alloy group, and so does the 1050 aluminum sheet.

1050 aluminum sheet, temper O~H112， thickness 0.2mm-350mm, widely used in printing aluminum sheets and PS plates.1050 aluminum sheet belongs to the commercially pure wrought family with a purity of 99.5% Aluminum. Except for Al, 0.4% of Fe is added to the 1050 aluminum sheet, thus, it has high electrical conductivity.

1050 pure aluminium flat sheets are a popular grade of aluminum for general sheet metal work where moderate strength is required. 1050 aluminum plain plate is known for its excellent corrosion resistance, high ductility and highly reflective finish.

Hot sale thickness: 0.8mm thickness 1050 aluminium sheet, sheet aluminum 3mm 1050

Weldability

When welding 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7xxx series, the recommended wire is 5356. For other alloys use 4043 filler wire.

Parameters of 1050 aluminum sheets

Equivalent name

a1050, 1050a, aa1050, 1050aa, al1050, 1050 aa, aa 1050, jis a1050p, al1050a, al1050 class, aw1050 grade etc

Temper

Soft HO, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H46, H111, H112, H114, H116, H131, H321 etc

H14 – work hardened by rolling to half hard, not annealed after rolling

Sizes: 1000mm x 2000mm, 0.5 m, 1500×3000 etc

Thickness: ( thin ) 0.5mm, 0.7mm, 0.8mm, 1mm, 2mm, 3mm, 4mm, 5mm, 6mm ( thick ) etc

1050 Aluminium sheet Fabrication

• Workability – Cold: Excellent
• Machinability: Poor
• Weldability – Gas: Excellent
• Weldability – Arc: Excellent
• Weldability – Resistance: Excellent
• Brazability: Excellent
• Solderability: Excellent

Chemical composition of 1050 alumiuinm sheet

Si ( Silicon )	Cu ( Copper )	Mg ( Magnesium )	Zn ( Zinc )	Mn ( Manganese )	Cr ( Chromium )	Fe ( Iron )	Ti ( Titanium )	Others total	Al ( Aluminum )
≤ 0.25	≤ 0.05	≤ 0.05	≤ 0.05	≤ 0.05	/	≤ 0.4	≤ 0.03	≤ 0.15	remainder

Features of 1050 alumiuinm plates

1. 1050 grade al, which belongs to pure aluminum series, has high ductility and reflectivity.
2. 1050 alu sheet is a non-heat treatment alloy, which is enhanced by cold working, and has excellent cold workability, solderability and weldability.
3. Compared with metals with higher alloy content, aluminium grade 1050 mechanical strength is lower, so 1050 aluminum alloy is well suitable for chemical and electrolytic brightening but not in casting.
4. The surface of aluminum sheet 1050 can be anodized.
5. Aluminium 1050 sheet has medium strength and excellent processing technology makes 1050 aluminum sheet have a wider range of applications.

Advantages

• 1050 aluminum sheet has good forming characteristics, high corrosion resistance, good electrical and thermal conductivity;
• Long service life, low cost and high recovery value;
• The processing technology of 1050 aluminum sheet is mature, and the price has a great advantage compared with other series of alloy aluminum sheet;
• It has 6 semi-continuous casting production lines, 10 continuous casting and rolling production lines and 44 other large-scale processing equipment.

1050 Aluminium sheet Mechanical Properties

For its content above in the chart, 1050 aluminium sheet has high ductility and high reflective finish. Besides, 1050 aluminum sheet is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability and solder-ability, and it is strengthened by cold working. However, 1050 aluminium sheet has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminium sheet well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enables our products has a vast application.

Applications for ​1050 aluminum plain sheet

Decoration, tableware, utensils etc

Alloy 1050 is typically used for:

• Chemical process plant equipment
• Food industry containers
• Pyrotechnic powder
• Architectural flashings
• Lamp reflectors
• Cable sheathing

Supplied Forms

• Plain sheet with a PVC coating on one side
• Stucco sheet with a PVC coating on one side
• Shate