Aluminum (Al), %
97.5 to 99
97.5 to 99.4
Chromium (Cr), %
0 to 0.1
0 to 0.1
Copper (Cu), %
0 to 0.1
0 to 0.1
Iron (Fe), %
0 to 0.35
0 to 0.35
Magnesium (Mg), %
0.4 to 0.6
0.45 to 0.9
Manganese (Mn), %
0 to 0.1
0 to 0.1
Silicon (Si), %
0.6 to 0.9
0.2 to 0.6
Titanium (Ti), %
0 to 0.1
0 to 0.1
Zinc (Zn), %
0 to 0.1
0 to 0.1
Residuals, %
0 to 0.15 ...
Look at the color: Anodized aluminum products usually come in different colors, which can range from light white to dark black. This is due to the difference in the thickness of the alumina film and the composition of the electrolyte. Generally speaking, the thicker the aluminum oxide film is, the darker it is.
Check the surface texture: The surface of anodized aluminum products is usually rough, with obvi ...
The leveling and polishing tank usually has two main purposes to set up the tank, namely leveling and polishing and removing fine dust from the aluminum alloy that has been polished on the sand surface.
5052 aluminum plate plane polishing: the plane polishing groove can not only produce a certain thickness of oxide film, but also can greatly improve the brightness of aluminum alloy. Since anodizing will make t ...
At present, we can see the use of brushed aluminum sheets everywhere, brushed aluminum sheet has been widely used in our life. The brushed aluminium sheet has different colors and different types, these colors look good and the surface treatment is very practical. In the aluminum grades, 1100, 3003, 6061 and 5052 are common used, and brushed aluminum sheet alloy 5052 has good performance on corrosion resistance. ...
3003 H14 Aluminum Sheet is alloyed with 1.2% maganese to provide a tensile strength range of 17 to 30 KSI. 3003 has Excellen workability, weldability, and corrosion resistance.
The application of 5052 aluminium sheet are various auto parts, sheet metal parts, mechanical parts, automobiles, aircraft fuel tanks, warships, submarines, containers, household appliance use, refrigerator liners and so on. Performance ...
Both 1100 aluminum and 5005 aluminum are aluminum alloys. Their average alloy composition is basically identical. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown.
For each property being compared, the top bar is 1100 aluminum and the bottom bar is 5005 aluminum.
Mechanical Properties
Elastic (Young's, ...