7075 alloy metal aluminum sheet plate

7075 Aluminum Sheet (Al-Zn-Mg-Cu) belongs to super-hard aluminum. As a kind of cold finished wrought alloy,  it has great strength and hardness. It’s far better than mild steel. This alloy has good mechanical properties and anode reaction. 7075 aluminum sheet as a typical kind of aerospace aluminum alloy material is usually used for high-end fields. 7075 Aluminum Sheet properties by temper Alloy Temper Thickness(mm) Width(mm) Length(mm) ...

Narrow width aluminum sheet plate

Common sizes 1x1 ft ( 1 x 1 ), 12x12 inch ( 12 x 12 ), 304.8 x 304.8 mm 1x2 ft ( 1 x 2 ), 12x24 inch ( 12 x 24 ), 304.8 x 609.6 mm 2x2 ft ( 2 x 2 ),, 24x24 inch ( 24 x 24 ), 609.6 x 609.6 mm 2x3  ft ( 2 x 3 ), 24x36 inch ( 24 x 36 ), 609.6 x 914.4 mm 2 x4 ft ( 2 x 4 ), 24x48 inch ( 24 x 48 ), 609.6 x 1219.2 mm 3x3 ft ( 3 x 3 ), 36x36 inch ( 36 x 36 ), 914.4 x 914.4 mm

Standard width aluminum sheet plate

Aluminum sheet plate refers to aluminum material with width of 200mm over. Standard width: 1000mm, 1200mm, 1220mm etc 4x4 ft ( 4 x 4 ), 48x48 inch ( 48 x 48 ), 1219.2 x 1219.2 mm 4x6 ft ( 4 x 6 ), 48x72 inch ( 48 x 72 ), 1219.2 x 1828.8 mm 4x8 ft ( 4 x 8 ), 48x96 inch ( 48 x 96 ), 8x4 ft ( 8 x 4 ), 1219.2 x 2438.4 mm 4x10 ft ( 4 x 10 ), 48x120 inch ( 48 x 120 ), 1219.2 x 3048 mm 4x12 ft ( 4 x 12 ), 48x144 inch ( 48 x 144 ), 1219.2 x 365 ...

What is the difference between aluminum A1050 H24 and H14?

Aluminum alloy No. 1050, H stands for work hardening state, Hxx state description: The first digit 1 stands for simple work hardening state, suitable for the required strength without additional heat treatment, only work hardening. The second digit represents the hardened state, the number 0 represents the annealing, ie the soft state, 8 represents the hard state, 9 represents the super-hard state, and the numbers 1 to 7 represent the state between 0 (anne ...

What is the difference between aluminum plate and patterned aluminum plate?

The surface of the aluminum plate is smooth and flat without corrugation and unevenness. It is a product made of cast-rolled billets through pressure rolling. The patterned aluminum plate is made of aluminum plate or aluminum coil through embossing equipment. It can be understood as aluminum ingot production into aluminum plate, aluminum plate It is embossed and processed into a patterned aluminum plate. Because of processing reasons, the price of patterne ...

The basic steps of making aluminum plates

1. Aluminum and aluminum alloy plates and strips are supplied in hot rolled state, annealed state, various levels of soft state and various heat treatment states. 2. Preparation before hot rolling It mainly includes ingot quality inspection, soaking, sawing, milling, aluminum coating and heating. 3. The cooling rate is very high during semi-continuous casting, the diffusion process in the solid phase is difficult, and the chemical composition and str ...

Aluminum plate production process and matters needing attention

Ingredients -> cutting -> grooving -> cutting corners -> bending -> assembly -> reinforcement -> re-inspection Ingredients: According to the order received by the factory, select the data model, specification, and color, and then transport it to the cutting machine before cutting it. Cutting: When cutting, first adjust the locator to the required scale. After cutting a small point, check whether the scale matches the required sca ...

Analysis of common problems of 5052 aluminum plate

The most useful application of 5052 aluminum sheet is appearance parts or electronic accessories. The common problems of 5052 aluminum sheet are as follows: 1. There are defects on the surface of the aluminum plate The surface problems of 5052 aluminum plate, except for the case related to the blank, most of the reasons are derived from the various machines in the production process. 2. After oxidation, there are defects such as color difference, ...

Can aluminum plates be laser cut? What are the benefits?

The cutting methods of aluminum plate usually include cutting machine operation, high-pressure water jet cutting, laser cutting and so on. Laser cutting is to irradiate the workpiece with a focused high-power density laser beam to quickly melt, vaporize, ablate or reach the ignition point of the irradiated material. At the same time, the molten material is blown away by the high-speed airflow coaxial with the beam to realize the cutting of the workpiece. o ...