custom sizes ( width and length ) aluminum sheet plate

Aluminum sheet plate refers to aluminum material with width of 200mm over, and length of less 16000m. Custom Sizes Commonly used aluminum plate sizes are: < 4 ft width aluminum sheet plate ( Narrow width aluminum sheet plate ) 4 ft width aluminum sheet plate ( Standard width aluminum sheet plate ) > 4 ft width aluminum sheet plate ( Wide aluminum sheet plate ) 1 foot = 12 inch = 304.8 mm, 4 feet = 48 inches = 1220 mm Custom wid ...

2000 series alloy metal aluminum sheet plate

Aluminium alloy sheet plate Difference between aluminum alloy sheet and aluminum alloy plate Aluminum sheet refers to aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200mm, and a length of less than 16m. It is called aluminum sheet or aluminum sheet, aluminum less than 0.2mm is aluminum, and 200mm width is a row or strip With the advancement of large equipment, there are more aluminum plates up to 60 ...

4000 series alloy metal aluminum sheet plate

Aluminum sheets Main products include 1-8 series aluminum plate/strip/coil/foil. We also produce mirror aluminum sheet, aluminum checkered plate, tread plate, embossed aluminum plate,etc a.Light weight b.Low cost c.Easier and convenient to install d.Environmental friendly and energy saving e.Anti-dirt and self-cleaning f.Corrosion resistant and moisture proof g.Weathering resistance stronger than stone material and valid time lo ...

6000 series alloy metal aluminum sheet plate

Aluminum sheets Main products include 1-8 series aluminum plate/strip/coil/foil. We also produce mirror aluminum sheet, aluminum checkered plate, tread plate, embossed aluminum plate,etc a.Light weight b.Low cost c.Easier and convenient to install d.Environmental friendly and energy saving e.Anti-dirt and self-cleaning f.Corrosion resistant and moisture proof g.Weathering resistance stronger than stone material and valid time lo ...

7000 series alloy metal aluminum sheet plate

Aluminum sheets Main products include 1-8 series aluminum plate/strip/coil/foil. We also produce mirror aluminum sheet, aluminum checkered plate, tread plate, embossed aluminum plate,etc 1) Alloy : 1100,1050,1060,1070,3003,3105, 5052,5754,5083,6061,6063 etc 2)Temper:O/H12/H14/H16/H18/H32/H34/H36/H38//H111/H112/H116/H321/T6/T651/T3/T351 etc 3) Thickness: 0.1mm to 300mm 4) Width:100mm to 2600mm 5)Length: ≤ 12000mm 6) Protective film protection o ...

5052 alloy metal aluminum sheet plate

5052 alloy metal aluminum sheet plate is highly resistant to corrosion. It belongs It is an alloy that contains 0.25 percent chromium and 2.5 percent magnesium, and it belongs to 5 series. It’s widely used because of its formability and durability. It has high fatigue and medium static strength. It can be used in marine environments without worry of corrosion. This metal also has excellent thermal conductivity and low density, which is commonly found with ...

5000 series alloy metal aluminum sheet plate

Aluminum plate refers to aluminum material with a thickness of 0.2mm to 500mm, a width of 200mm or more, and a length of 16m or less.It is called aluminum sheet or aluminum sheet. With the progress of large equipment, there are more aluminum plates up to 600mm wide). Aluminum plate refers to a rectangular plate rolled by aluminum ingots. It is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate, a ...

aluminum sheet metal prices 4×8

What does 4x8 aluminum sheet metal mean? 4'x 8' also called 48“x 96”,because this is an imperial measure. The single quote ' refers to the foot. 4' and 8' respectively indicate 4 foot and 8 foot, 1 foot=304.8 mm, 4'=1219 mm, 8'=2438 mm 4'*8' indicates the width of aluminum sheet plate × length = 4 foot × 8 foot = 1219mm × 2438mm. Which aluminum alloy can do 4x8 aluminum sheet metal? In our factory, the 4x8 Aluminum Sheet Metal for sale mainly inclu ...

4×8 foot aluminum sheet plate

4x8 metal aluminum sheet plate mainly includes 1000 series aluminum sheet, 3000 series aluminum sheet,5000 series aluminum sheet,6000 series aluminum and 8000 series. These five type sheet of aluminium has their unique specifications, advantages and properties. The customers can choose the best kind of sheet aluminium according to their needs. There are numerous aluminum sheet manufacturers in China, henan huawei Aluminum is one of the first-level l ...

6082 alloy metal aluminum sheet plate

6082 aluminum sheet heat treatment can strengthen the alloy, with good formability, weldability, machinability and corrosion resistance, while a moderate strength, after annealing can still maintain good operability, mainly for mechanical structure Including bar, sheet, pipe and profile. 6082 and 6061 aluminum plate are both Al-Mg-Si aluminum alloy which can be strengthened by aging treatment, with good extrusion and forging properties, and good ano ...

6063 alloy metal aluminum sheet plate

6063 aluminum sheet is Al-Mg-Si alloy, with excellent processing performance, excellent solderability, extrusion and plating, good corrosion resistance, toughness, easy polishing, anodizing Excellent effect, is a typical extruded alloy. 6063 Aluminum sheet is widely used in construction profiles,  irrigation pipes, vehicles, benches, furniture, lifts for its good plasticity 6063 aluminum plate is an aluminum-magnesium-silicon alloy with e ...

6061 alloy metal aluminum sheet plate

6061 aluminum sheet plate is a high-quality alloy product produced by heat treatment and pre-stretching. Although its strength cannot be compared with 2000 series alloy or 7000 alloy series, the composition of 6061 aluminum alloy is mainly Mg and Si, so 6061 aluminium sheet plate exhibits excellent processing performance, excellent weldability and electroplating, good corrosion resistance, high toughness and other characteristics. It is worth mentionin ...

3003 alloy metal aluminum sheet plate

3003 alloy metal aluminum sheet plate is approximately 20% stronger than 1100 series aluminium. 3003 alloy is readily formed by either conventional cold working or hot working. We offers high quality 3003 flat aluminium sheet plate and tread plate covered by the ISO standard 6361 and the ASTM standards B209, B210, B211, B221, B483, B491, and B547. The 3003-H14 is a softer, more formable aluminium sheet plate and 3003 aluminum tread plate offers increas ...

3003 h14 aluminum

3003 ALUMINUM SHEET FEATURES: Alloy:3003 Temper: H14, H16, H18, H22, H24, H26, O Thickness(mm):0.25-10 Width(mm):100-2600 3003 aluminum sheet is anticorrosive and its production technology is good. The main ingredient in it is manganese element and the content is between 1.0% and 1.5%. 3003 ALUMINUM SHEET CHEMICAL COMPOSITION: Alloy No. Si Fe Cu Mn Mg Cr Zn Ti Others Al 3003 0.6 0.7 0.05-0.20 1.0-1.5 0 0 0.10 ...

3105 alloy metal aluminium sheet plate

3105 aluminium sheet with 98% pure aluminium and slight alloy additions for strength. 0.3% of copper is added to 3105 aluminium sheet, so the conductivity turns out to be 41%. For its contents and processing technologies, 3105 aluminium sheet is light in weight and it has semi-smooth surface. Besides, it is not hardened by heat treatment. 3105 has good anti-rust performance, good electrical conductivity, electrical conductivity up to 41%, 3105 alumi ...

3004 alloy metal aluminum sheet plate

3004 aluminum sheet belongs to AL-Mn alloy series, which has higher strength than 3003. And the properties of formability, solubility, and anti-corrosion are also pretty good. It usually used to produce some components which request much higher strength than 3003. 3004  aluminum sheet is a non- heat treatable aluminium alloy with manganese as its primary alloying element. It is similar to 3003 except for the addition of approximately 1% magnesium. I ...

1100 metal pure aluminum sheet plate

1100 alloy metal aluminum sheet plate is one of the softest aluminum alloys, so it is not used for high strength or high pressure applications. Although pure aluminum is usually cold-worked, it can also be hot-worked, but it is more common that aluminum is formed through spinning, stamping, and drawing processes that do not require the use of high heat. These processes produce aluminum profiles in the form of foils, plates, round bars, sheets, strips a ...

1060 metal pure aluminum sheet

1060 aluminum sheet is pretty similar to 1050 aluminum alloy with more than 0.1% of aluminum by weight. Both 1050 and 1060 aluminium sheet of Huawei AL, lives up to ISO standards, but they cover different ASTM standards. 1060 aluminium sheet contains 0.05% cooper, thus, its conductivity is 55%. Besides, 1060 aluminium sheet is relatively low strength, essentially pure aluminium alloy with many different tempers, such as O (annealed), H12, H14, H16, H18 ...

1050 metal pure aluminum sheet plate

1050 metal aluminum sheet plate belongs to commercially pure wrought family with a purity of 99.5% Aluminium( over 99.0% ). Except Al, 0.4% of Fe is added to 1050 aluminium plates, thus, they has high electrical conductivity. 1000 series aluminium group offers the best correction resistance compared to any alloy group, so does the 1050 aluminium sheet. 1050 pure aluminium flat sheets are an popular grade of aluminium for general sheet metal work whe ...


Warning: implode(): Invalid arguments passed in /www/wwwroot/aluminium-sheet-hw/wp-content/themes/hwalu 4.1/taxonomy-product_tag.php on line 64