what is 1070 aluminum sheet? 1070 aluminum sheet has some features such as high plasticity, anti-corrosion, electrical conductivity and good thermal conductivity, but low strength. And the machinability is not good without heat treatment. It can be used for gas welding. This specific properties of 1070 aluminum alloy can be used to produce some structures such as aluminium gasket and capacitor, electronic wire ...
Aluminum sheets Main products include 1-8 series aluminum plate/strip/coil/foil. We also produce mirror aluminum sheet, aluminum checkered plate, tread plate, embossed aluminum plate,etc a.Light weight b.Low cost c.Easier and convenient to install d.Environmental friendly and energy saving e.Anti-dirt and self-cleaning f.Corrosion resistant and moisture proof g.Weathering resistance strong ...
Why is it called 5 × 10 aluminum sheet？ The 5 in the 5 × 10 aluminum sheet refers to the width of a piece of aluminum sheet is 5 feet (abbreviated as "5'"), and the 10 refers to the length of an aluminum sheet of 10 feet (abbreviated as "10'"). 1 foot = 304.8 mm = 0.3048 meters 5 feet = 1524 mm = 1.524 meters 10 feet = 3048 mm = 3.048 meters 5 × 10 aluminum sheet What are the other common aluminum ...
What does the 4x8 in the 4x8 foot aluminum plate mean? In general, 1'=1 foot (symbol ft) = 12 inches (12") = 30.48 cm = 304.8 mm 1"=1 inch ( inch is abbreviated as in or " ) = 2.54 cm = 25.4 mm (actual value is 2.539999918 cm.) So, 4 in 4 x 8 foot is 4 x 304.8 mm = 1219.2 mm = 1.2192 m ≈ 1220mm ≈ 1.22 m 8 in 4 x 8 feet is 8 x 304.8 mm = 2438.4 mm = 2.4384 meters ≈ 2440mm ≈ 2.44 m i.e. 4x8 foot = 1.22m ...
What is .125 Aluminum Sheet? .125 aluminum sheet is a versatile and widely used material in various industries. It is made of aluminum alloy, which is known for its lightweight, strength, and corrosion resistance. The "125" in the product name refers to the thickness of the sheet, which is 0.125 inches. Factory--Huasheng Aluminum As a leading manufacturer of aluminum sheets, Huasheng Aluminum offers a comp ...
Introduction to 3004 aluminum sheet/plate? 3004 aluminum sheet is a non-heat-treatable aluminum alloy with manganese as its primary alloying element. It is similar to 3003 except for the addition of approximately 1% magnesium. It can be used to produce tempers with a higher strength but a lower ductility. 3004 series also belongs to a series of aluminum manganese alloy. It has higher strength than 3003, exce ...
1060 Aluminum Sheet Specifications ♦ alloy:1060 ♦ temper:O~H112 ♦ width:500mm-1500mm ♦ Length:according to your requirements 1060Aluminum Sheet Features ♦ 1000 series aluminum sheet, also called pure aluminum sheet, has the highest aluminum content among all the series produced. Its aluminum content can be more than 99.00%. the aluminum content of 1060 series aluminum sheet has to reach 99.6% or ...
Both 7005 aluminum and 6061 aluminum are aluminum alloys. They have a moderately high 95% of their average alloy composition in common. For each property being compared, the top bar is 7005 aluminum and the bottom bar is 6061 aluminum. Aluminum alloys are highly resistant to corrosion. They are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F), and tend to lose some of their strength ...
The 1060 aluminum sheet is one of the pure aluminum sheet, and the content of it can reach 99%, which is a kind of commonly used aluminum sheet. It has a wide application no matter in the science laboratory or in the chemical industry, it can seen everywhere. The 1060 aluminum sheet is also very common in the daily life, such as the cap, electrical condenser， and the shell of the light. The character of the i ...
Material Notes: Same nominal composition but higher Si and Fe impurity limits than Al-5657 Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN. Composition Notes: Composition information provided by the Aluminum Association and is not for design. Key Words: UNS A95005; ISO AlMg1; Aluminium 5005-H34; AA5005-H34; Al5005-H34 5005 h34 aluminum sheet Availabl ...
7075-T6 Aluminum Sheet is primarily used in aerospace industry, often referred to as the Strongest Aluminum grade. Alloy 7075 has the strength of many steels, while retaining aluminum’s lightweight qualities. 1100 aluminum sheet for industrial pure aluminum, aluminum content (mass fraction) of 99%, non heat treatment. It has high corrosion resistance, electrical conductivity and thermal conductivity, low densi ...
The representative alloy of 6063 has lower strength than 6061 and good extruding properties. It can be used as a profile with complex cross-sectional shapes, and has good corrosion resistance and surface treatment. Europium is a low-alloyed Al-Mg-Si series high-plasticity alloy. Has many valuable characteristics: 1. heat treatment strengthened, high impact toughness, not sensitive to lack. 2. Has excellent ...