6061 aluminum sheet plate is a high-quality alloy product produced by heat treatment and pre-stretching. Although its strength cannot be compared with 2000 series alloy or 7000 alloy series, the composition of 6061 aluminum alloy is mainly Mg and Si, so 6061 aluminium sheet plate exhibits excellent processing performance, excellent weldability and electroplating, good corrosion resistance, high toughness and other characteristics. It is worth mentionin ...
Common sizes 1x1 ft ( 1 x 1 ), 12x12 inch ( 12 x 12 ), 304.8 x 304.8 mm 1x2 ft ( 1 x 2 ), 12x24 inch ( 12 x 24 ), 304.8 x 609.6 mm 2x2 ft ( 2 x 2 ),, 24x24 inch ( 24 x 24 ), 609.6 x 609.6 mm 2x3 ft ( 2 x 3 ), 24x36 inch ( 24 x 36 ), 609.6 x 914.4 mm 2 x4 ft ( 2 x 4 ), 24x48 inch ( 24 x 48 ), 609.6 x 1219.2 mm 3x3 ft ( 3 x 3 ), 36x36 inch ( 36 x 36 ), 914.4 x 914.4 mm
Aluminum sheet plate refers to aluminum material with width of 200mm over. Standard width: 1000mm, 1200mm, 1220mm etc 4x4 ft ( 4 x 4 ), 48x48 inch ( 48 x 48 ), 1219.2 x 1219.2 mm 4x6 ft ( 4 x 6 ), 48x72 inch ( 48 x 72 ), 1219.2 x 1828.8 mm 4x8 ft ( 4 x 8 ), 48x96 inch ( 48 x 96 ), 8x4 ft ( 8 x 4 ), 1219.2 x 2438.4 mm 4x10 ft ( 4 x 10 ), 48x120 inch ( 48 x 120 ), 1219.2 x 3048 mm 4x12 ft ( 4 x 12 ), 48x144 inch ( 48 x 144 ), 1219.2 x 365 ...
Aluminum alloy No. 1050, H stands for work hardening state, Hxx state description: The first digit 1 stands for simple work hardening state, suitable for the required strength without additional heat treatment, only work hardening. The second digit represents the hardened state, the number 0 represents the annealing, ie the soft state, 8 represents the hard state, 9 represents the super-hard state, and the numbers 1 to 7 represent the state between 0 (anne ...
The surface of the aluminum plate is smooth and flat without corrugation and unevenness. It is a product made of cast-rolled billets through pressure rolling. The patterned aluminum plate is made of aluminum plate or aluminum coil through embossing equipment. It can be understood as aluminum ingot production into aluminum plate, aluminum plate It is embossed and processed into a patterned aluminum plate. Because of processing reasons, the price of patterne ...
1. Aluminum and aluminum alloy plates and strips are supplied in hot rolled state, annealed state, various levels of soft state and various heat treatment states. 2. Preparation before hot rolling It mainly includes ingot quality inspection, soaking, sawing, milling, aluminum coating and heating. 3. The cooling rate is very high during semi-continuous casting, the diffusion process in the solid phase is difficult, and the chemical composition and str ...
Ingredients -> cutting -> grooving -> cutting corners -> bending -> assembly -> reinforcement -> re-inspection Ingredients: According to the order received by the factory, select the data model, specification, and color, and then transport it to the cutting machine before cutting it. Cutting: When cutting, first adjust the locator to the required scale. After cutting a small point, check whether the scale matches the required sca ...
The most useful application of 5052 aluminum sheet is appearance parts or electronic accessories. The common problems of 5052 aluminum sheet are as follows: 1. There are defects on the surface of the aluminum plate The surface problems of 5052 aluminum plate, except for the case related to the blank, most of the reasons are derived from the various machines in the production process. 2. After oxidation, there are defects such as color difference, ...
The cutting methods of aluminum plate usually include cutting machine operation, high-pressure water jet cutting, laser cutting and so on. Laser cutting is to irradiate the workpiece with a focused high-power density laser beam to quickly melt, vaporize, ablate or reach the ignition point of the irradiated material. At the same time, the molten material is blown away by the high-speed airflow coaxial with the beam to realize the cutting of the workpiece. o ...