Material Notes: Same nominal composition but higher Si and Fe impurity limits than Al-5657
Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR DESIGN.
Composition information provided by the Aluminum Association and is not for design.
Key Words: UNS A95005; ISO AlMg1; Aluminium 5005-H34; AA5005-H34; Al5005-H34
5005 h34 aluminum sheet Available Properties:
Density, AA; Typical
Hardness, Brinell, AA; Typical; 500 g load; 10 mm ball
Tensile Strength, Ultimate, AA; Typical
Tensile Strength, Yield, AA; Typical
Elongation at Break, AA; Typical
Modulus of Elasticity, AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than tensile modulus.
Shear Strength, AA; Typical
Electrical Resistivity, AA; Typical
CTE, linear, AA; Typical; average over range
Specific Heat Capacity
Thermal Conductivity, AA; Typical at 77°F
Melting Point, AA; Typical range based on typical composition for wrought products 1/4 inch thickness or greater
Solidus, AA; Typical
Liquidus, AA; Typical
Annealing Temperature, holding at temperature not required
Aluminum, Al, As remainder