তুমি কি জানো 5052 aluminum properties?

5052 aluminum sheet is often referred to as “”Anodize Quality Aluminum””, as it has excellent finishing qualities and anodized coatings are bright and clear. The major alloying element in 5052 is magnesium in sufficient quantities to cause substantial lowering of the melting point without producing brittleness. When magnesium is used as the major alloying element, বা ম্যাঙ্গানিজের সাথে একত্রে, the result is a moderate to high strength non-heat treatable aluminum alloy. 5052 is far stronger than the 1100 বা 3000 series aluminums, yet forms with reasonable bend radii. Weldability is very good and 5052 has good resistance to corrosion, especially in salt-water / marine atmospheres.

6061 অ্যালুমিনিয়াম শীট খাদ শক্তিশালী, সহজে মেশিন করা, এবং ঝালাইযোগ্য. অ্যালুমিনিয়াম 6061 T6 alloys are doubled the strength of aluminum 6063 খাদ. অ্যালুমিনিয়াম 6061 has an ultimate tensile strength of at least 42,000 psi (290 এমপিএ) and yield strength of at least 35,000 psi (241 এমপিএ). In thicknesses of 0.250 ইঞ্চি (6.35 মিমি) or less, it has elongation of 8% অথবা আরও; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The famous Pioneer plaque was made of this particular alloy. Order 6061 Aluminum Sheets in 6061 Aluminum in small quantities and no minimums of all Aluminum 6061 at The Metal Store. “”

দ্য 5052 aluminum alloy is used to make beverage closure without internal pressure. The raw material is 5052 H19 aluminum sheet, the material is first oxidized to improve the coating adhesion and corrosion resistance. After the two sides are painted, the can lid is formed. তাই 5052 aluminum is another material for processing closures. 5052 aluminum sheet has good oxidation coloring effect, excellent metal texture and hardness, wear resistance and corrosion resistance, long service life, and is widely used in high-end mobile phone casings, high-end air-conditioning casings and other fields with high requirements for oxidation and metal texture.