Henan huawei aluminum stocks the aluminum plate you need for both Aerospace and Commercial applications. Four regional plate processing centers offer precision saw cut parts to the tightest tolerances available in the industry. Aluminum has an excellent strength to weight ratio and a high resistance to corrosion. These unique characteristics along with its electrical and thermal conductivity make aluminum plates the product of choice for many industrial applications. A wide selection of both Common and Heat Treated Alloys are available from stock to service the following industries.
This is the most common of the the high-strength aluminum alloys. It is high grade aircraft quality. 2024-T3 aluminum sheet is thought of as the aircraft alloy because of its strength and it also has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024-T3 Alclad aluminum sheet are fuselage and wing skins, cowls, aircraft structures, and also for repair and restoration because of its shiny finish (2024-T3 Alclad).
Most widely used of aluminum alloys, pure aluminum with manganese added for strength, approx 20% stronger than the 100 series. 3003-H14 aluminum sheet has great workability and may be deep drawn, spun, welded or brazed. 3003 aluminum sheet is NON-heat treatable. This aluminum sheet is widely used for cowls and baffle plating.
This one has the highest strength in the NON-heatable alloy series. It is not structural. 5052 aluminum sheet has higher fatigue strength than most alloys. 5052 aluminum sheet has excellent corrosion resistance, particularly in marine applications and has excellent workability. 5052 aluminum sheet is commonly used to built fuel tanks.
5083 aluminum sheet belongs to Al-Mg-Si aluminium alloys. Its main contents are Magnesium and Silicon except Aluminium. Over 4.0% of Magnesium enables 5083 aluminum sheet to have excellent resistance to correction, and easily to welded. By adding cooper, 55083 aluminum sheet has 28% Electrical conductivity. 5083 aluminum sheet also has good forming characteristic for either hot or cold working. But hardening is accomplished by means of cold working only. Besides, 5083 aluminum sheet does have good strength but non-heat treatable.
This alloy has a very good corrosion resistance and finishing ability, welding goes without any problems too. The strength level of 6061-T6 aluminum sheet is about that of mild steel. 6061-T6 aluminum sheet can be fabricated by most of the commonly used techniques. Typical uses are aircraft landing mats, truck bodies and frames, structural components and more.
Aircraft manufacturers use high-strength alloys (principally alloy 7075) to strengthen aluminum aircraft structures. Aluminum alloy 7075 has Copper (1.6 %), Magnesium (2.5 %) and zinc (5.6 %) added for ultimate strength, but the copper content makes it very difficult to weld. On the other hand it anodizes really beautifully. 7075 has the best machinability and it will result in a very nice finish.
All material meets ASTM or AMS specifications with ultrasonic testing as required. Test certificates are maintained to ensure full material traceability.Waterjet cut parts for special aluminum plate shapes can be provided with close tolerances and minimal distortion.