1060 aluminum sheet is pretty similar to 1050 aluminum alloy with more than 0.1% of aluminum by weight. Both 1050 and 1060 aluminium sheet of Huawei AL, lives up to ISO standards, but they cover different ASTM standards. 1060 aluminium sheet contains 0.05% cooper, thus, its conductivity is 55%. Besides, 1060 aluminium sheet is relatively low strength, essentially pure aluminium alloy with many different tempers, such as O (annealed), H12, H14, H16, H18, etc. what’s more, other aluminium sheet belonging to commercial pure wrought family are available, including 1050, 1070, 1100 and so on and so forth.
1060 aluminum sheet is noted for its excellent welding characteristics and formability by cold or hot working with commercial techniques. It cannot be hardened by heat treatment but only from cold working. Tempers H12, H14, H16 and H18 are determined by the amount of cold working imparted into the alloy. Moreover, 1060 aluminium sheet has good corrosion resistance as well as poor machine-ability, and its machine-ability can be improved in harder (cold working) tempers, such as H16 and H18. For its features above, 1060 aluminum sheet has a vast application, such as electric and chemical equipment, railroad tank cars, etc.
1060 aluminum sheet Have good elongation and tensile strength, can satisfy completely the requirements of conventional processing (stamping, stretch) high formability. For industrial pure aluminium, high plasticity, corrosion resistance, electrical conductivity and thermal conductivity, but strength is low, heat treatment can not be improved machinability is bad; Gas welding, hydrogen welding and resistance welding, is not easy to brazing; Under various pressure processing and extension, bending.
1060 aluminum sheet is widely used in products of strength requirement is not high.. Products are often used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.