China 5052 h34 aluminum sheet suppliers

2019-02-15

The 5052 h34 aluminum sheet is highly resistant to corrosion. It is an alloy that contains 0.25 percent chromium and 2.5 percent magnesium. It’s widely used because of its formability and durability. It has high fatigue and medium static strength. It can be used in marine environments without worry of corrosion. This metal also has excellent thermal conductivity and low density, which is commonly found with other aluminum alloys. Its fatigue properties and endurance limit are excellent. The endurance limit is 125 MPa in an H34 temper and 115 MPa in an H32 temper.

6061 aluminum sheet alloy is strong, easily machined, and weldable. Aluminum 6061 T6 alloys are doubled the strength of aluminum 6063 alloys. Aluminum 6061 has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The famous Pioneer plaque was made of this particular alloy. Order 6061 Aluminum Sheets in 6061 Aluminum in small quantities and no minimums of all Aluminum 6061 at The Metal Store. ""

5052 Aluminum sheet is primarily alloyed with magnesium and chromium. It has good workability, medium static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in marine atmospheres. It also has the low density and excellent thermal conductivity, used for aircraft fuel tanks, storm shutters, refrigerator liners and panels, etc.


TAG:5000 series aluminum 5000 aluminum 5005 aluminum 5005 aluminum sheet suppliers 5005 h34 aluminum sheet en aw 5005 en aw 5005 h14 en aw 5005a en aw 5005 h24 5052 aluminum 5052 aluminum yield strength 5052 aluminum tempers 5052 h32 aluminum sheet 5052 h34 aluminum sheet 5052 h32 aluminum 5052 aluminum sheet 5052 aluminum sheet properties 5052 aluminum sheet price 5052 aluminum sheet thickness 5052 aluminum sheet metal en aw 5052 5052 aluminum vs 6061 aluminum 5052 h32 vs h34 5052 vs 5005 5052 vs 6061